Static and Dynamic IP Address,what is the difference? How to setup Dynamic IP Address in 1 Minute

What is an IP Address?An IP address is a unique number that allows computers to locate each other on a network. The Internet is a big network and uses IP addresses to route communication to the proper host. The IP in IP address stands for Internet Protocol. An IP address looks like this: 204.16.252.112.


What is a Dynamic IP Address?

A Dynamic IP address is one that is not static. It changes from time to time. If you are unsure if your IP address is static or dynamic, chances are pretty high that it is dynamic. They are more cost effective for your ISP.
Imagine that once a day at a random time your phone company changed your telephone number. If there was no way to look it up no one would be able to call you! This is what a dynamic IP address effectively is. It’s a changing phone number. The number used to find your computer on the Internet can be different each time you log on, or at the discretion of your ISP. Dynamic DNS is like a live phone book that updates itself when your number changes. It knows your number at any given time so that people can connect to you. To make sure the dynamic DNS server has your proper IP address, your computer must run an update client to let the server know when your IP address has changed.

What is a Static IP Address?
A static IP address is one that doesn’t change, it is assigned to you by your ISP (Internet Service Provider) and often costs extra money. A static IP address is yours and will never change (unless you cancel the subscription)

 How To: Change Your dynamic IP address Ip In Less Then 1 Minute
1. Click on "Start" in the bottom left hand corner of screen
2. Click on "Run"
3. Type in "command" and hit ok

You should now be at an MSDOS prompt screen.

4. Type "ipconfig /release" just like that, and hit "enter"
5. Type "exit" and leave the prompt
6. Right-click on "Network Places" or "My Network Places" on your desktop.
7. Click on "properties"

You should now be on a screen with something titled "Local Area Connection", or something close to that, and, if you have a network hooked up, all of your other networks.

8. Right click on "Local Area Connection" and click "properties"
9. Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
10. Click on "Use the following IP address" under the "General" tab
11. Create an IP address (It doesn't matter what it is. I just type 1 and 2 until i fill the area up).
12. Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
13. Hit the "Ok" button here
14. Hit the "Ok" button again

You should now be back to the "Local Area Connection" screen.

15. Right-click back on "Local Area Connection" and go to properties again.
16. Go back to the "TCP/IP" settings
17. This time, select "Obtain an IP address automatically"
tongue.gif 18. Hit "Ok"
19. Hit "Ok" again
20. You now have a new IP address

With a little practice, you can easily get this process down to 15 sec.
This only changes your dynamic IP address, not your ISP/IP address. If you plan on hacking a website with this trick be extremely careful, because if they try a little, they can trace it back.So if You want To Hack ,you Should Use a VPN(Virtual Private Network),in the Next turtorial i shall Share to you Free VPN servers.

Related Posts

Share this post

Subscribe Our Newsletter